How To Shock A Swimming Pool

Have you ever taken a look at your pool and said to yourself, "Gee, the water doesn't look right." A pool should have crystal-clear and inviting waters, not murky and sickly looking. If the pool water doesn't look right, then you might have algae growth and this can be a bit of a concern. Not only does algae growth make your pool look unappealing, but it can be dangerous as well, as algae is very slippery and can cause accidents.

On top of that, algae has been known to cause allergic reactions in some people, as well as damage your pool filters and other fittings if left unchecked. So at the first sign of algae growth, take some time to shock your pool and keep your pool waters crystal clear.  

Warning: Long and very interesting article ahead!

If you just want to shock your pool without going through the nitty-gritty of how everything works together when it comes to shocking a pool then you can get a bottle of Water TechniX Oxi Shock (available in the future on the online store, subscribe to the mailing list to get notified!) or Stabilised pool chlorine, follow the directions on the bottle and that's it! But if you want to get to know your pool better and learn about the finer points of shocking your pool then read on!

What is shocking a swimming pool, and how do I do it?

  1. Sanitise your pool with a heavy treatment of chlorine (either granular or liquid). Ensure that non-stabilised chlorine is used.
  2. Lower your pH with hydrochloric acid. By doing this, the chlorine will be more effective.
  3. Ensure the system is on and running for a 24 hour period to disperse the shock treatment around the pool and clean the filter for any debris captured.
  4. Test and re-balance 2 to 3 days after and make any additional adjustments required. Switch the filtration system back to its normal operating procedure.

Types of Pool Shock

In the old days (figuratively speaking), shocking was just carried out using unstabilised chlorine, but nowadays you can find different varieties of chemicals labeled as pool shock and let's see what each one is.

Calcium Hypochlorite or Cal Hypo  

Cal hypo is one of the oldest forms of chlorine used for pools dating back as far as 1928. This comes in granular form and this has to be dissolved thoroughly in water before being broadcasted around the pool. The purity of cal hypo is anywhere from 65% to 75% chlorine depending on the manufacturer. Take note that using cal hypo also adds 0.8ppm of calcium to your pool for every 1.0ppm free chlorine added to the pool. If you're using this to shock your pool, don't forget to check your calcium levels down the line.

Lithium Hypochlorite Pool Shock

This dissolves much faster than cal-hypo and works faster but at a cost. The rising cost of lithium has made this type of pool shock rather hard to find and is much more expensive. The upside to this is that lithium is toxic to most types of aquatic life, making it especially effective especially when dealing with green pool water. Note: Lithium hypochlorite only has around 35% chlorine so you'll need to add more in order to shock your pool.

Dichlor or dichloroisocyanuric acid.

Dichlorocya... let's just call it dichlor, everyone calls it that anyway. This is basically your stabilised chlorine since it has cyanuric acid in it. Be careful when using stabilized chlorine when shocking your pool as too much cyanuric acid or stabiliser can pull down the efficacy of your chlorine's sanitizing power.

How much do I need to shock my pool?

We don't really have a set calculation because everything will depend on the manufacturer of the type of shock that you'll be using, refer to the packaging for more precise instructions on how much to use.

BUT for estimating purposes, if we were to use regular pool chlorine with 60% chlorine purposes, we'll roughly need 1lb of chlorine for every 10,000 gallons of pool water for shocking purposes. With that baseline, we can get a rough estimate of how much we'll need to shock the pool.

Note that sometimes we may need to double or triple that amount depending on the situation so it's important to take note of the terms "double shock" or "triple shock" when reading guides here on Mr Pool Man.

Three stages of Pool Algae Growth

There are 3 different stages of pool algae growth in which different amounts of pool shocking are needed:

  • Light green algae
  • Dark green algae
  • Black green algae


These are not different types of algae, but rather different levels of algae growth. The more algae in your pool water, the darker the green colour will be. We’ve seen pools almost black with an algae infestation. Gross!

Light Green Pool Water

If you have a light green pool, you need to shock your pool (adding more acid and chlorine than usual) in order to kill the algae.

Algae feeds off high pH. Chlorine isn't as effective when your pH is high. You’ll need to lower your pH using hydrochloric acid. Start with around 32oz to 64L. Be careful when adding it to the pool, ensuring it doesn't splash up on you as it is highly toxic and dangerous. If your pool is vinyl lined, only add 1L every 24 hours, as it's more sensitive to harsh chemicals.

You also need to shock your pool with chlorine. Add 2 cups (about a pound) of granulated chlorine (not stabilised) or 3 tubs of 15L chlorine (as it's actually only 20% chlorine and the rest is water). If your pool is salt water chlorinated, add 2 to 4 bags of salt (once again you should get your salt tested at your local pool shop to see exactly where it's sitting) and turn your chlorinator to 100% for a couple of days to really boost that chlorine and get that water sanitised. Your salt levels should be sitting at around 5000ppm (parts per million), with each 20kg bag of salt equating to 500ppm.

Note: Keep the pump running for at least 24 hours when shocking the pool to make sure all of the water is properly circulated around the pool!

*We recommend only using stabilised chlorine if absolutely necessary. Preferably, you should be using non-stabilised chlorine and adding in your stabiliser separately to avoid a chlorine lock (put simply, chlorine lock means that the chlorine in the pool is useless which means the water isn't being sanitised. It can also indicate the presence of chloramines which give off a chlorine smell).

The reason for this is because you require much less stabiliser than you do chlorine.This issue can be avoided as a whole by installing a chlorinator if you don't already have one."

If you've added your salt and turned your chlorinator up to 100% but, after a few days, there's still no ( or next to none), chlorine being produced or your "low salt" light is still on, your electrode may need replacing. The average lifespan of an electrode is 3 to 5 years.

You also will need to clean your cartridge filter or backwash your sand filter and ensure your skimmer baskets and pump baskets are empty.

If the green in your water has made its home on your pool steps and doesn't want to budge, adding hydrochloric acid should slowly start killing the algae. If your pool is concrete, you can use a metal brush to help brush this algae off, or if your pool is vinyl you can use a normal plastic bristle brush.

Mr Pool Man can't sell or ship hydrochloric acid, liquid chlorine, granulated chlorine or salt online as it's either dangerous or too heavy. You can grab them from your local pool shop.

We recommend testing your water a few days after this heavy dose to check your levels. You can do this yourself using a 7 in 1 Test Strip Kit.

Dark Green Pool Water

If you have dark green pool water, you should look to follow the above steps, but with a slightly higher dose of acid and chlorine. Adding, for example, 64 oz of acid over a space of 48 hours and adding 2 to 3 cups (1-1.5lbs) of granulated chlorine. Also, darker green water may also be a cause of stagnant debris sitting on the bottom of the pool which needs to be cleaned out before you dose it. Be sure that this has all been scooped up using a leaf shovel, followed by being manually vacuumed out of the pool using a vacuum head, an appropriate length hose for your pool.

Water TechniX Vacuum Set

Black Green Pool Water

If you have black green pool water, you will be looking at doing the ‘Light Green Pool Water’ dosage as outlined above x3. This may take some filtering, cleaning or backwashing of the filter, and more filtering to completely clean up over a period of 2 to 3 weeks.

Black green pool water will almost certainly leave stagnant debris sitting on the bottom of the pool which needs to be cleaned out before you dose it. Whether it be leaves or other debris, be sure that it is all scooped up using a leaf shovel, before being manually vacuumed out of the pool using a vacuum head, an appropriate length hose for your pool and a telepole.

Note: If you have a vinyl lined pool, diluting any chemicals that are being added to your pool in SEPARATE tubs of water (we don't want any chemical reactions occurring) is always a good idea to ensure no damage is done to the liner.

High Combined Chlorine Levels

Another situation that calls for shocking the pool involves having high levels of combined chlorine. High levels of combined chlorine can render your chlorine ineffective and is responsible for that "chlorine smell" in your pool. A properly chlorinated pool doesn't smell of chlorine but it should have that "fresh" smell to it! Before, the best way to deal with this was to raise the chlorine levels about 10x what they normally are to oxidise chloramines and about a 24-48 hour wait for the chlorine levels to stabilise, but with the new Water TechniX Oxi shock (coming soon to the Mr Pool Man online store), all it takes is one easy application to oxidise chloramines and your pool can be used after 15 minutes!

If you have any questions, product suggestions, or things that you would love to see sold on Mr Pool Man, let us know through the form below.

Value is required
Value is required
Value is required
Please validate your form with reCAPTCHA.
Your message has been sent. Thank you!
Maintenance

Leave a comment

All comments are moderated before being published